ΠεριγραφήGetting the VLT Ready for Even Sharper Images.jpg
English: This picture shows one of ESO’s Very Large Telescope (VLT) Unit Telescopes (UT4) whilst it was recently briefly held prisoner by ESO’s engineers. It was surrounded by a temporary cage of scaffolding as part of the preparations for the new Adaptive Optics Facility (AOF). This project will convert UT4 into a fully adaptive telescope. The AOF will correct for the blurring effects of the Earth’s atmosphere and will allow much sharper images to be achieved with the HAWK-I and MUSE instruments.
Many new components are being added to UT4 as part of the AOF. Among these is the deformable secondary mirror (DSM): a thin-shell mirror, 1.1 metres in diameter, but just 2 millimetres thick. This mirror is thin enough to be easily deformed by more than a thousand actuators, up to a thousand times per second in order to counteract the atmosphere’s distortions. The DSM is the largest adaptive mirror manufactured to date. Another vital element is the four Laser Guide Star Facility (4LGSF) — four special telescopes that fire laser beams high into the atmosphere to create artificial stars. Finally, the GRAAL and GALACSI adaptive optics modules will be responsible for analysing the light coming back from the laser guide stars.
This picture shows an ESO engineer supervising the work performed on UT4. To allow full access to the telescope, the cell of the primary mirror has been temporarily removed. Cables and pipes have also been removed and new ones have been installed. Mounting brackets have been added in preparation for the installation of the 4LGSF electronic cabinets and launch telescopes.
This media was created by the European Southern Observatory (ESO). Their website states: "Unless specifically noted, the images, videos, and music distributed on the public ESO website, along with the texts of press releases, announcements, pictures of the week, blog posts and captions, are licensed under a Creative Commons Attribution 4.0 International License, and may on a non-exclusive basis be reproduced without fee provided the credit is clear and visible." To the uploader: You must provide a link (URL) to the original file and the authorship information if available.
να μοιραστείτε – να αντιγράψετε, διανέμετε και να μεταδώσετε το έργο
να διασκευάσετε – να τροποποιήσετε το έργο
Υπό τις ακόλουθες προϋποθέσεις:
αναφορά προέλευσης – Θα πρέπει να κάνετε κατάλληλη αναφορά, να παρέχετε σύνδεσμο για την άδεια και να επισημάνετε εάν έγιναν αλλαγές. Μπορείτε να το κάνετε με οποιοδήποτε αιτιολογήσιμο λόγο, χωρίς όμως να εννοείται με οποιονδήποτε τρόπο ότι εγκρίνουν εσάς ή τη χρήση του έργου από εσάς.
https://creativecommons.org/licenses/by/4.0CC BY 4.0 Creative Commons Attribution 4.0 truetrue
Αυτό το αρχείο περιέχει πρόσθετες πληροφορίες, πιθανόν από την ψηφιακή φωτογραφική μηχανή ή το scanner που χρησιμοποιήθηκε για την δημιουργία ή την ψηφιοποίησή της. Αν το αρχείο έχει τροποποιηθεί από την αρχική του κατάσταση, ορισμένες λεπτομέρειες πιθανόν να μην αντιστοιχούν πλήρως στην τροποποιημένη εικόνα.
Αναφορά/Πάροχος
ESO/G. Blanchard
Πηγή
European Southern Observatory
Συνοπτικός τίτλος
Getting the VLT Ready for Even Sharper Images
Τίτλος εικόνας
This picture shows one of ESO’s Very Large Telescope (VLT) Unit Telescopes (UT4) whilst it was recently briefly held prisoner by ESO’s engineers. It was surrounded by a temporary cage of scaffolding as part of the preparations for the new Adaptive Optics Facility (AOF). This project will convert UT4 into a fully adaptive telescope. The AOF will correct for the blurring effects of the Earth’s atmosphere and will allow much sharper images to be achieved with the HAWK-I and MUSE instruments. Many new components are being added to UT4 as part of the AOF. Among these is the deformable secondary mirror (DSM): a thin-shell mirror, 1.1 metres in diameter, but just 2 millimetres thick. This mirror is thin enough to be easily deformed by more than a thousand actuators, up to a thousand times per second in order to counteract the atmosphere’s distortions. The DSM is the largest adaptive mirror manufactured to date (ann12015). Another vital element is the four Laser Guide Star Facility (4LGSF) — four special telescopes that fire laser beams high into the atmosphere to create artificial stars [1] (ann12012). Finally, the GRAAL and GALACSI adaptive optics modules will be responsible for analysing the light coming back from the laser guide stars. This picture shows an ESO engineer supervising the work performed on UT4. To allow full access to the telescope, the cell of the primary mirror has been temporarily removed. Cables and pipes have also been removed and new ones have been installed. Mounting bracketshave been added in preparation for the installation of the 4LGSF electronic cabinets and launch telescopes. Notes [1] The laser beams excite a layer of sodium atoms at an altitude of 90 kilometres in the atmosphere, making them glow as artificial stars.